What Is Double Drawn Hair? 7 Must-Know Facts

What is double drawn hair, and what makes it different from other hair extension grades? For wholesale buyers, the main difference lies in the fullness of the ends. Double drawn hair goes through additional sorting to remove shorter strands, giving the bundles a thicker, more even appearance. However, the final result depends on the supplier’s grading standards. Knowing how double drawn hair is made and how to check its density can help buyers choose the right grade and avoid inconsistencies in bulk orders.

What Is Double Drawn Hair?

Before you compare suppliers, you need a definition you can write into a purchase order.

Double drawn hair is hair sorted through repeated drawing so that most strands in a bundle sit close to full length. In wholesale terms, 60% to 70% of the strands reach the stated bundle length, and the rest taper toward the ends. The word “drawn” describes length uniformity only. It says nothing about the donor count, the hair origin, or the condition of the cuticle.

How the Drawn Grade Works in a Wholesale Bundle

A drawn grade works like a ratio, so it helps to read it the way you would read a spec sheet.

A 100g bundle holds strands of many lengths when it comes off the raw ponytail. Drawing removes part of the shorter strands, and a higher share of long strands gives a fuller bottom edge. Most buyers who request this grade want that fuller edge at a price below the top tier. Because the grade is a measurable ratio, you can verify it on a sample instead of trusting a name.

What This Grade Is Not

Mixing up grade and quality is the most common mistake in first orders, so it is worth separating the two.

• Drawn grade describes length uniformity.
• Virgin, remy, and non-remy describe origin and processing.
• Single donor describes how many people the hair came from.

A bundle of double-drawn hair can be raw and unprocessed, or it can be chemically treated, and the grade alone will not tell you which.

Vietlink Hair insight: Buyers often treat the drawn grade as a quality rating, then discover the difference after bleaching. Ask for the hair origin and the drawn grade as two separate lines on every quotation.

How Double Drawn Hair Is Made at the Factory

The grade comes from the sorting process, so knowing each step helps you judge any supplier’s claims.

Double drawn hair starts as raw ponytail hair collected from donors, with strands of mixed lengths bundled together. Factories sort these ponytails by length and texture before drawing begins. Keeping cuticle alignment intact matters, because strands that run root to tip in one direction tangle less in the finished bundle. Weighing and banding follow the final draw.

Raw Ponytail Sorting and the First Draw

The first stage decides how much usable length the factory has to work with.

Workers comb the ponytail through a drawing board, and the shortest strands fall away. This pass produces single drawn hair, which keeps a natural taper at the ends. Single donor ponytails give the most consistent result at this stage, since the strands share a similar thickness and growth pattern. Mixed lots need more sorting time to reach the same evenness.

The Second Draw and Length Alignment

A second pass is what separates this grade from single-drawn.

The bundle goes through drawing again, and more of the remaining short strands are removed. Fewer short strands means a fuller bottom edge and a higher long strand ratio. Each pass adds labor time and removes hair, so more raw ponytail is needed to make one finished bundle. That extra material and time is why double drawn hair is priced above single drawn hair.

Wholesale Specifications Buyers Should Know

Numbers on the spec sheet tell you more than the grade name does.

Spec	Typical industry range	What to confirm
Long strand ratio	60% to 70%	Measured on a sample bundle
Bundle weight	100g	Net weight against the quote
Length range	12 to 30 inches (30cm to 76cm)	Stated length against measured length
Weft density	Varies by maker	Grams per weft
Texture	Straight, wavy, curly	Natural pattern or steam-styled

These ranges reflect common industry practice rather than one factory standard, so confirm exact figures on the supplier’s spec sheet. Length also changes the cost picture. Double drawn hair at 30 inches needs far more raw ponytail than the same grade at 16 inches, because only long ponytails can supply long strands. Longer lengths therefore carry a steeper price per bundle.

Double Drawn vs Single Drawn vs Super Double Drawn Hair

Once the spec is clear, the next question is where this grade sits between its two neighbors.

Grade	Long strand ratio	Bottom edge	Price position	Main trade-off
Single drawn	45% to 55%	Natural taper	Lowest	Ends can look thin
Double drawn	60% to 70%	Fuller, slight taper	Middle	Not fully blunt
Super double drawn	80% to 90%	Nearly blunt, very full	Highest	Higher cost per bundle

Each grade has one clear advantage and one clear drawback. Single drawn hair looks the most natural at the ends but can look thin on short styles. Super double drawn hair gives the fullest edge but raises your cost per bundle. Double drawn hair balances both, which is why many salons use it as their core line.

Who Should Order This Grade?

The right grade depends on who your end customer is and how they style the hair.

If your customers wear long layers and want a natural look, single drawn hair may be enough. If they want fuller ends on sew-in, clip-in, or tape-in extensions without a big price jump, double drawn hair is the more practical choice. If they wear short bobs or blunt cuts, super double drawn hair is the better fit. A fuller edge also adds weight, so on very fine natural hair a lighter grade can blend better.

Match the grade to the buyer:

• Salon owners: choose it for clients who want volume at the ends without a premium price.
• Distributors: one core grade keeps the catalog simple and reduces dead stock.
• Wig and extension brands: test two grades side by side, then match each grade to a product line.

Common Mistakes Buyers Make With Drawn Grades

Most disputes over drawn grades trace back to a handful of avoidable errors.

• Approving a sample made from a different batch than the bulk order.
• Comparing prices without comparing long strand ratios.
• Assuming a higher grade can fix a weak raw material.
• Skipping a wash test before approving production.
• Ordering long lengths without checking the taper at the ends.

Raw hair with intact cuticles holds a smooth surface after bleaching. Hair with a silicone coat can turn rough and matted after the first wash. A drawn grade cannot repair either problem, because it only measures length. Treat origin, processing, and grade as three separate checks.

Double Drawn Hair Quality Checklist Before You Order

A grade label only helps if the bundle matches it, so test a sample before you scale.

1. Weigh the bundle: Confirm the net weight matches the quote, for example, 100g.
2. Measure the length: Hold the bundle at the root and compare the longest and shortest strands.
3. Check the ends: Pull a small section and count how many strands fall short of the main length.
4. Check cuticle direction: Run your fingers from root to tip, and the surface should feel smooth.
5. Compare bundles: Take three bundles from one order, and the ends should look consistent.
6. Wash a sample: Review density and feel again after washing, before you approve bulk production.

Vietlink Hair insight: Do not judge by shine alone. A silicone finish can make lower-grade strands look smooth until the first wash, so wash one sample bundle before you approve the order.

A reliable batch of double-drawn hair keeps the same edge density after washing. If the ends thin out noticeably, the sample was likely graded by eye rather than measured.

What Affects Wholesale Pricing

Price gaps between suppliers usually come from a few factors you can identify and compare.

• Length: longer ponytails are scarcer, so cost rises with every inch.
• Raw material: single donor lots cost more than mixed lots.
• Waste rate: more drawing removes more hair from each bundle.
• Texture: steam-styled waves and curls add processing steps.
• Volume: MOQ and order size change the price per bundle.

Because drawing removes hair, the supplier needs more raw ponytail for the same finished weight. That is the main reason this grade costs more than single drawn hair. When you compare quotes, ask each vendor to state grade, length, weight, and origin on the same line. A low quote with a vague grade often points to a lower long strand ratio.

How to Choose a Double Drawn Hair Factory

With the specs and pricing logic clear, the last step is vetting the supplier.

• Ask for a physical sample from the current batch, not a showroom piece.
• Request the long strand ratio for each grade in writing.
• Ask how the factory handles quality control, including washing, combing, weighing, and banding.
• Confirm MOQ, lead time, and return terms before you pay a deposit.
• Ask whether the hair is single donor raw hair or a mixed lot.

Reliable vendors answer these questions with specifics, and vague answers are a signal to slow down. You can request a sample of double drawn hair from Vietlink Hair and run the checklist above before you place a bulk order

Why Import Double Drawn Hair from Vietlink Hair?

For wholesale buyers, choosing the right factory means more than finding a competitive price. Vietlink Hair helps buyers source double drawn hair with clear product specifications and quality checks before bulk orders.

• Consistent grading: Confirm drawn grades and length distribution before production.

• Sample verification: Evaluate hair texture, end fullness, and weight before ordering in bulk.

• Flexible sourcing: Discuss lengths, textures, and product requirements for your target market.

• Wholesale support: Confirm MOQ, lead time, packaging, and shipping details before placing an order.

Whether you are a salon owner, distributor, or hair brand, start with a sample and a written specification sheet to reduce sourcing risks. Contact Vietlink Hair to discuss your double drawn hair requirements and wholesale order

FAQ

These are the questions wholesale buyers raise most often before a first order.

Is It the Same as Remy Hair?

These two terms are often mixed up, but they describe different things.

No. Remy describes cuticle alignment and origin handling, while drawn describes length. Hair can be Remy and still be single drawn, or double drawn and not Remy, so ask for both details.

How Long Does It Last?

Lifespan is a common concern for buyers who resell to salons.

Hair type and care matter more than the grade. Raw, unprocessed hair that is washed gently and air-dried lasts longer than treated hair, and heat or harsh products shorten the life of any grade.

What Is a Typical MOQ?

Minimum order rules vary, so it helps to know what to ask.

Minimums differ by factory, length, and texture. Ask for the MOQ in writing and confirm whether it is counted by weight or by bundle.

Is It Worth It for Salons?

The answer depends on your client base and your price points.

For many salons, yes, because clients who want full ends can get them without paying for the top tier. Order a small batch first, then compare client feedback and reorder rates before you scale up. Double drawn hair also keeps your inventory simpler than stocking every grade.

Final Thoughts

Double drawn hair is a length grade, not a quality tier, so judge origin, processing, and grade as separate lines. Verify the long strand ratio on a sample, wash it, and compare bundles before approving bulk production.

Before committing to a bulk order, define your specifications, confirm the supplier’s documentation, and test samples against your intended use. Contact Vietlink Hair to discuss your requirements and build a product specification that suits your business.

WhatsApp: +84 855 555 951
Email: info@vietlinkhair.com
Facebook: Vietlinkhair